Industrial Dryers

Approx. Rs 1.95 Lakh / PieceGet Latest Price

Fluid Bed Dryer is designed to introduce the hot air stream at the base of the product container which is filled with the material. Induced draught is created by means of blower and fresh air is sucked in to the unit. The fresh air is heated by means of electrical heaters or steam or thermic fluid heaters. This hot air stream expands the bed of material at certain velocity & reating turbulance in the product. The phenomenon is known as fluidisation and offer conditions which are almost ideal for drying. Fluidisation produces full agitation of solid particles and since each particle gets surrounded by hot air, heat transfer is extremely high and uniform. The product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer. Bharat Process Equipment (BPE) offers a wide range of capacities from 5kg to 500kg in all material grade.

Additional Information:

• Item Code: BFBD
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva Mumbai
• Production Capacity: 100 Units/Month
• Delivery Time: 4 Weeks
• Packaging Details: Wooden Packaging

Approx. Rs 95,000 / PieceGet Latest Price

• Tray Dryers are widely used in Pharmaceutical, food, chemicals and other industries.
• Bharat Process Equipment (BPE) offers wide range of capacities from 4 trays to 96 trays in all grades of material.

• Industry approved design
• Elevated performance
• Longer life
• Efficient
• Operational fluency
• Seamless finish

Additional Information:

• Item Code: BATD
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva Mumbai
• Production Capacity: 100 Units/Month
• Delivery Time: 4 Week
• Packaging Details: Wooden Packaging

Product Price :Get Latest Price

Approx. Rs 4.95 Lakh / PieceGet Latest Price

• Main Body/Vacuum chamber thick SS 316 plate with heavy duty SS 316 flange and stiffeners.
• Door thick SS 316 plate (hemisphere shape) with heavy duty SS 316 flange.
• Shelves Hollow type pads with SS 316 Sheet and Baffles.
• Condenser (shell and tube) and Receiver SS 304 with Isolation valve and Flow glass in between to monitor condensation.
• Trays (with out back folding ) in SS 316 rounded corners and edges.
• Explosion Vent/ Rupture Disc on vacuum chamber
• Digital Temperature controller (FLP) with solenoid controlled Pneumatic operated valve at Hot water inlet.
• Provision for Validation Port on Body.
• Digital Temp. , Indicator (FLP) at H.W. inlet & outlet.
• Digital type Vacuum gauge and Digital Temperature Indicator (FLP) in vapor line.
• Pressure release valve on steam line.
• View Glass/ Light glass provided on vacuum chamber Dorr, Body, and Receiver.
• Silicon Transparent gasket door.
• Nitrogen purging valve provided in Vacuum chamber.
• Vacuum break valve provided on a vacuum, chamber.
• Drain valve for Vacuum chamber and Receiver.
• Temperature Accuracy plus minus 2 to 3 degree
• Finish; Internal 320 grit Mirror Polish and outer 180 grit mat finish.

• Condenser and Receiver in SS 316 instead of SS 304
• Insulation on the vacuum chamber outer surface except the door. The insulation is enclosed and covered with removable SS 304 panels.Skirting /wall panel all along the body/vacuum chamber flange.
• Validation port with Censors.
• Hot water system ( steam heated) with MS tank ( Insulated), SS 304 steam radiator/electrical heaters, circulation pump with FLP Motors and controls.
• Vacuum Pump ( 2 stage water ring) with FLP motor.

Additional Information:

• Item Code: BVTD
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva Mumbai
• Production Capacity: 100 Units/Month
• Delivery Time: 4 Weeks
• Packaging Details: Wooden Packaging

Approx. Rs 2.95 Lakh / PieceGet Latest Price

• Reduces drying time
• Eliminates need for re-drying of lumps
• Handling and exposure of final product is avoided
• Gives uniformity size dry product
• System can process crystalline or amorphous powders which are prone for lumps
• Easy to clean internal surface, thus ensuring purity of product
• Optimum and continuous vacuum maintenance during process
• Uniform material shuffling over the heated contact surface of the cone

Additional Information:

• Item Code: BRCVD
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva Mumbai
• Production Capacity: 100 Units/Month
• Delivery Time: 4 Weeks
• Packaging Details: Wooden Packaging

Approx. Rs 2.75 Lakh / PieceGet Latest Price

• The central agitator shaft is supported on the two end bearings housed in bearing housing in such a way that the alignment remains always intact. This central agitator is driven by means of a Motor & Gear box through the bull Gear. Cooling could also be provided by cold water / brine refrigerant through the jacket.
• The horizontal shell is jacketed to heat the shell with steam / hot water or any other thermal fluid. Limpet coil is provided instead of jacket if the heating media is fluid. A Dust Catcher consisting of bag filter is provided on the top to prevent the losses of material particles after the drying process. A Condenser of adequate heating surface area is provided wherein the evaporated vapors are condensed and these condensed vapors are then collected in the receiver of suitable capacity, placed beneath the condenser.
• A Vacuum Pump of adequate capacity is provided & fitted to the receiver of these rotary vacuum dryers to create the vacuum in the dryer shell through the Receiver, Condenser and Dust Catcher. Bharat Process Equipment (BPE) offers a wide range of capacities as per the requirement of customers.

Additional Information:

• Item Code: BRVD
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nava Sheva Mumbai
• Production Capacity: 100 Units/Month
• Delivery Time: 4 Weeks
• Packaging Details: Wooden Packaging